Chisel Point Chemical Stud Flat Top Anchor Class 8.8 Hot Dip Galvanised

From $16.50

Clear

Description

[Product Information]

Hobson® Chemical Anchor Studs are a single unit non expansion fasteners that is used in pre-drilled holes into a selected/specified resin. They comprise of a chisel or bevelled point stud available in flat cut or external hexagon type head, a nut and washer. Fixing of the stud is achieved by inserting a suitable curing resin into the hole using a glass chemical capsule or injection adhesive system. The stud is then inserted into the hole and rotated either by hammer drill (for glass capsule) or hand (for injection type) to allow for proper setting into the resin. The stud can be loaded once appropriate curing time has been achieved.

Applications
• Fixing to concrete or masonry substrates
• Holding down machinery
• Commonly used in applications that require non expansion type fasteners
• Used in applications that require closer edge distance and spacing

Features
• Good load capability
• Non expanding anchor
• Resistant to vibration
• Complete sealing of hole
• Can be installed close to edge
• Reduced spacing between anchors
• Excellent holding power in weak base materials

 

 

PartQFindDescriptionProductFinishSizeLen
MCS88GCM100130MCS111GAL 8.8 CHEM STUD KIT:M10 X130STUD CHEM ANCHOR KIT(FLAT TOP)HOT DIP GALVANISEDM10130
MCS88GCM120160MCS112GAL 8.8 CHEM STUD KIT:M12 X160STUD CHEM ANCHOR KIT(FLAT TOP)HOT DIP GALVANISEDM12160
MCS88GCM160190MCS113GAL 8.8 CHEM STUD KIT:M16 X190STUD CHEM ANCHOR KIT(FLAT TOP)HOT DIP GALVANISEDM16190
MCS88GCM200260MCS114GAL 8.8 CHEM STUD KIT:M20 X260STUD CHEM ANCHOR KIT(FLAT TOP)HOT DIP GALVANISEDM20260
MCS88GCM240300MCS115GAL 8.8 CHEM STUD KIT:M24 X300STUD CHEM ANCHOR KIT(FLAT TOP)HOT DIP GALVANISEDM24300

 

Additional Information

Diameter x Length:

M10 x 130mm, M12 x 160mm, M16 x 190mm, M20 x 260mm, M24 x 300mm