Chisel Point Chemical Stud External Hex Class 5.8 Hot Dip Galvanised

From $13.20

Clear

Description

[Product Information]

Hobson® Chemical Anchor Studs are a single unit non expansion fasteners that is used in pre-drilled holes into a selected/specified resin. They comprise of a chisel or bevelled point stud available in flat cut or external hexagon type head, a nut and washer. Fixing of the stud is achieved by inserting a suitable curing resin into the hole using a glass chemical capsule or injection adhesive system. The stud is then inserted into the hole and rotated either by hammer drill (for glass capsule) or hand (for injection type) to allow for proper setting into the resin. The stud can be loaded once appropriate curing time has been achieved.

Applications
• Fixing to concrete or masonry substrates
• Holding down machinery
• Commonly used in applications that require non expansion type fasteners
• Used in applications that require closer edge distance and spacing

Features
• Good load capability
• Non expanding anchor
• Resistant to vibration
• Complete sealing of hole
• Can be installed close to edge
• Reduced spacing between anchors
• Excellent holding power in weak base materials

 

 

PartQFindDescriptionProductFinishSizeLen
MCA58GCM080110HMCA106GAL-HX CHEM ANCH KIT:M8 X 110STUD CHEM ANCHOR KIT (EXT HEX)HOT DIP GALVANISEDM8110
MCA58GCM100130HMCA107GAL-HX CHEM ANCH KIT:M10 X 130STUD CHEM ANCHOR KIT (EXT HEX)HOT DIP GALVANISEDM10130
MCA58GCM120160HMCA108GAL-HX CHEM ANCH KIT:M12 X 160STUD CHEM ANCHOR KIT (EXT HEX)HOT DIP GALVANISEDM12160
MCA58GCM160190HMCA109GAL-HX CHEM ANCH KIT:M16 X 190STUD CHEM ANCHOR KIT (EXT HEX)HOT DIP GALVANISEDM16190
MCA58GCM200260HMCA110GAL-HX CHEM ANCH KIT:M20 X 260STUD CHEM ANCHOR KIT (EXT HEX)HOT DIP GALVANISEDM20260
MCA58GCM240300HMCA111GAL-HX CHEM ANCH KIT:M24 X 300STUD CHEM ANCHOR KIT (EXT HEX)HOT DIP GALVANISEDM24300

 

Additional Information

Diameter x length:

M8 x 110mm, M10 x 130mm, M12 x 160mm, M16 x 190mm, M20 x 260mm, M24 x 300mm